Cap compression molding machine
Feature:
- Plastic cap compression molding machine is applicable for cap production from thermoforming plastics (PP,PE,etc.,) , its rotating design ensures continuous cap production and no injection time, so yield greatly increased.
Specification:
| TYPE | MODEL | BW-16C | BW-24C | BW-36C |
|---|---|---|---|---|
| CAP | Raw Material | PP/HDPE/LDPE/PTE | PP/HDPE/LDPE/PTE | PP/HDPE/LDPE/PTE |
| Capacity(pc/hr) | 13000-17000pcs/hr | 18000-20000pcs/hr | 30000pcs/hr | |
| Diameter of Cap | 22-45mm | 22-45mm | 22-45mm | |
| Height of Cap | 10-25mm | 10-25mm | 10-25mm | |
| Number of Cavity | 16cavities | 24cavities | 36cavities | |
| ELECTRICAL SYSTEM | Installation Power | 40kw | 55kw | 63kw |
| Actual Power Consumption | 16-20kw | 25-28kw | 30-35kw | |
| Power Supply(Three Phase,Five Wire) | 380V 50HZ | 380V 50HZ | 380V 50HZ | |
| AIR SYSTEM | Operation Pressure | 0.8Mpa | 0.8Mpa | 0.8Mpa |
| Pressure Consuming | 1.0m³/hr | 1.0m³/hr | 1.0m³/hr | |
| MACHINE | Machine dimension | 3.8x1.7x2.6m | 4.3x1.9x2.6m | 4.5*2.25*2.65m |
| Machine weight | 3.8ton | 5ton | 6ton |
